Hydrocyclone Gravel Sand Washer Industrial Sand Recycling Machine
The integrated sand washing and recycling machine can the improve the quality of sand (such as water content, large amount of mud, much dust, difficult and easy removal of impurities, etc.) and reduce the loses of sand in the processing of washing.
According to the customer's requirements, we can provide the integrated sand washing and recycling system, which is consisted of sand washer, dewatering screen, hydrocyclone, slurry pump, etc.
| Model | Pump power(kw) | Sieve power(kw) | Capacity(m³/h) |
| KL-HX250 | 7.5-11 | 0.75×2 | 50-80 |
| KL-HX300 | 11-15 | 0.75×2 | 80-100 |
| KL-HX350 | 18.5-22 | 0.75×2 | 100-120 |
| KL-HX500 | 18.5-22 | 1.1×2 | 120-150 |
| KL-HX600 | 22-30 | 1.1×2 | 150-200 |
| KL-HX700 | 37-44 | 2.2×2 | 200-250 |
| KL-HX1000 | 60 | 3×2 | 250-300 |
Features
1) Greatly reduce the mud, water, dust, impurities in the sand, greatly improving the quality of sand and increasing the benefits.
2) Low energy consumption and environmental protection.
3) Convenient transportation and quick installation.
4) Low failure rate and long service life.
Introduction of Fine Sand Reclaimer Fine sand reclaimer is widely used in purifying mud, sand and gravel aggregate hydropower systems, glass raw materials processing systems, artificial sand production line and CPP coarse slime recovery and other fine particulate material recovery . In the process wet sand making process, the loss of fine sand is the main factor reduce product sand powder content. Fine Sand Reclaimer not only increases production, but also reduces soil and water pollution.
Working principle
Through rubber pipes sand and water mixture is extracted from cleaning tank into slurry pump. The fine sand is collected by the centrifugal force of the cyclone, then fed to the polyurethane screen from the apex spray. The 0.16-3mm fine sand and water are efficiently separated through the vibration screen. The waste water will flow back to the return box, through weld chute or pipes flowing to a settling pond.
Product introduction
Fine sand recycling machine through the slurry pump will be the concentration of ≤ 40% of the slurry into the hydraulic cyclone separator for separation, the separation of coarse particles partially into the dewatering screen dewatering and recycling, a larger limit of the recovery of more than 75cm of material, to remove less than 75cm of the sludge and clay, can be used in conjunction with the existing production line of the sand washer, but also can be used alone, to enhance the utilization rate of the resource, to achieve a greater benefit. Stable and reliable operation, good economic benefits.
Outstanding Advantages
1. Fine sand is fully recovered, reducing the workload of the sedimentation tank and the cleaning cost of the sedimentation tank.
2. The equipment refers to the national environmental protection standards, low noise, can be configured with equipment to remove dust, the construction environment is fully in line with environmental requirements.
3. In the traditional wet processing of artificial sand, the spiral sand washer is used for washing mud and dewatering artificial sand, and the loss of fine sand in artificial sand can hardly be controlled. Adopting this fine sand recycling machine can effectively reduce the loss of fine sand, so that it is controlled within 5%-10%, which is a good solution to the problem of high fineness modulus and low stone powder content of the finished sand in the artificial aggregate processing system.
Product Tags:
|
|
Hydrocyclone Gravel Sand Washer Industrial Sand Recycling Machine 11kw 0.75*2kw Images
|
